45153 - Paragon - Janus 24 Kiln

Login to view price

Glass and clay firing modes

Select between glass and pottery with the flip of a switch. With the switch in the glass position, heat comes from the top elements and the middle sidewall element. With the switch in the pottery position, heat comes from only the sidewall elements.

In the glass mode, fuse and sag large glass projects placed on a single shelf. In the pottery mode, fire to cone 10. You can also fire several shelves of smaller glass pieces in pottery mode.

The Janus-24 digital kiln heats from the top, three sides and door for unsurpassed heat distribution. Bend glass for curved windows or cabinet doors and to repair lampshades. Make huge glass-fused platters. Crack the door to drag a rod across the softened glass or to emboss designs in the surface. Explore small-to-medium sized casting and pâte de verre. Enjoy the glittering beauty of dichroics. Make treasured gifts.

Advanced element grooves

The elements in the roof are mounted in a firebrick “ball” groove that eliminates element pins. The element coils are wider than the groove opening, so the elements stay in place without pins. The groove dissipates heat efficiently.

Wires are fastened to the elements with heat-dissipating connectors refined and proven over many years in Paragon kilns. Elements are coiled from the finest high-temperature wire available.

Optional mercury relay

If you need to anneal glass for extended periods in your Janus-24, purchase the optional mercury relay upgrade. Mercury relays, which are found on our large industrial kilns, outlast mechanical relays. The life of the quiet, reliable mercury relay has been measured in millions of on/off cycles.

Heavy duty components

The insulating firebrick, wrapped in heavy-gauge steel, soak up heat for slow, efficient cooling. A double heat shield and air gap between the kiln and ventilated switch box help keep electrical components cool for long, trouble-free service. Costly heavy-gauge nickel-plated copper wiring is covered with high temperature glass-braided insulation. font>

The spring-pressure latch and a ½” recess around the edge of the firebrick door keep the door tightly closed. The door remains rock-steady on a heavy hinge shaft. Four hand lifts aid moving. The base is open in the back and slotted to dissipate heat.

Thermocouple with “special limit” wire

The thermocouple senses temperature inside the kiln. It is the small rod that extends into the side of the firing chamber. The Janus-24 comes with an exposed-tip thermocouple made with special-limit wire for superior accuracy. The new and improved thermocouple replaces our earlier sheathed thermocouple. The new thermocouple is made in America to our exacting standards.

Two peepholes

Watch the red-hot glass through two tapered peepholes, drilled one above the other in the wall opposite the switch box. Peephole plugs are included.

Door safety switch

The kiln includes a door safety switch that turns off the elements when the door is opened. The controller remains powered and automatically resumes firing when you close the door.

Digital temperature accuracy

The digital Sentry 2.0 includes two modes: Cone-Fire with programmed slow cooling and the fully customizable Ramp-Hold mode. Manufactured by the Orton Ceramic Foundation exclusively for Paragon.

You will be amazed at the convenience of digital firing. The reliable solid-state Sentry controller continually monitors the firing so you can spend your time productively without closely watching the kiln. (Please remember, however, to check the kiln during firing and to monitor it near the expected shutoff time.) The sealed touch pad keeps out dust and is easy to wipe clean.

Paragon’s innovative controller will help you achieve consistent results from one firing to the next. The controller has powerful features that you will enjoy using. Yet we have also worked hard to make the controller user-friendly.

Do you ever wonder how much electricity your kiln uses? The digital controller can figure this for you with the press of a button. Find out how little a kiln actually costs to fire. Learn to conserve energy by experimenting with firing speed, load density, etc.

Features:
– Digital Sentry 2.0 controller with cone-fire mode for programmed slow cooling & 18-segment Ramp-Hold,
– 3″ insulating refractory firebrick walls,
– Heavy duty heating elements (sidewall elements easy to replace)
– Flip switch to select between pottery and glass
– Switch in glass position – heat comes from top & middle sidewall elements,
– Switch in pottery position – heat comes from only sidewall elements,
– Lock-in lid support,
– Hand lifts,
– Tapered peephole for wide view,
– Steel floor pan supports entire brick bottom.
Warranty: 1 year.
Weight: 425 Lbs. (approx.)

Shipping by Truck or Pickup Only

Furniture Kit Includes:

1 – C-22GL Shelf (22” Square x 1”)

2 – C-30H Shelves (22” x 11” x 1”)

1 1/2” wide Square Posts, 4 of each – ½”, 1”, 2”, 3”, 4”, 5” lengths

1 lb. Glass Separator

Kiln:
- Paragon - Janis series,
- Combo glass & pottery kiln (designed for glass, porcelain, ceramics, china paint, decals & gold).
Model Number: Janus 24.
Firing Chamber: 24" W. x 22-1/2" D x 15" H.
Outside Measurements: 40-1/2" W. x 32" D. x 29-1/2" H.
Max. Temp.: 2350ºF.
Cu/Ft.: 4.68.
Volts: 240V or 208V.
Amps: 45A.
Phase: Single.
Min. Wire Size: 6.
Breaker Rating: 60A.
Watts: 10800.
Receptacle: NEMA 6-50P.
Shipping Weight: 425 Lbs.
Shipping: Shipping NOT available via UPS/Fed Ex.
Special Order Only:  Allow 4-6 weeks

All furniture kits sold separately, contact info@rainbowartglass.com for pricing

This field is required.
Top

©2016 Rainbow Art Glass - All rights reserved.

©2016 Rainbow Art Glass - All rights reserved.

eCommerce by CubeCart | Design and Development by ShoreSite Web Designs LLC